Odin Flash tool user guide
Step 1: Download and install Samsung USB Driver on Your Computer.In Case You have already instakked the Samsung USB Driver on Competer
then Skip this step:
Step 2:Download (Stock ROM compatible with your device or if you already downloaded the firmware then ignore downloading it again) and
extract it on Your computer.After extracting you will be able to see thes king of files:
Step 3:Power Off your Samsung Device
Step 4:Now,you have to boot into Download mode.To boot into Download mode:Press and Hold Volume Down Key,Home Key and Power
key.When.phone vibrates Leave the Power Key but keep holding the Volume Down key and Home key.You will boot into the Download Mode:
Step 5:In the Download mode you be able to see a Warning Yellow Triangle Sign:
Step 6:Download and extract Odin on your computer.After extracting you will be ble to see the following files:
Step 7:Now,Open Odin# and connect your phone tothe computer.
Step 8:Once you have connected the phone to he computer,Odin will automatibally recognize the device and show “Added” message at the
Step 9:Once your device detected by Odin,click on the “PDA” button and select the tar.md5 file that you have extracted in Step #2.
Step 10:Now,click on the “Start” button in Odin to begin Flashing process.
Step 11:Once you see, the Green Pass Message then remove the USB cable from the device(during this process,your device will restart
Step 12:Your Samsung Device will now stuck at boot(boot loop).Now you have to boot into Stock Recovery Mode,TovEnable Stock Recovery
mod:Prass and Hold Volume Up key,Home key,Powre key,when phone vibrates
leave the Power key but keep holding the Volume Up key and Home key.You will boot into Recovery Mode.
Step 13:In Rcovery Mode,Wipe Data/factory reset.
Step 14.Once Cache Data is cleared,Select Restart phone Now from the recovery menu.
Step 15:Now your Samsung Device will restart without any issue with the Stock Rom you have downloaded.